Answers are grounded in this paper and cite their sources.
Experimental validation demonstrates stable current modulation in a CMOS VCSEL driver, indicating potential for compact, low-power short-range LiDAR transmitters.
This paper presents a bandgap-referenced current-mode vertical-cavity surface-emitting laser (VCSEL) driver for short-range light detection and ranging (LiDAR) sensor applications. To improve current stability under process, voltage, and temperature (PVT) variations, the proposed driver employs a bandgap-referenced bias generation scheme combined with a current-mode modulation architecture. The driver was implemented in a 0.18 µm CMOS process and occupies a compact core area of 350 × 100 µm2. Post-layout simulation results show that the proposed circuit maintains a bias current of approximately 2 mA and a modulation current of approximately 10 mA across PVT corners. The fabricated chip was measured using a 50 Ω termination, and the measured output voltage swing was approximately 495 mVpp, corresponding to a modulation current of 9.9 mApp. Hence, the proposed current-mode VCSEL driver provides a potential solution as a compact, low-power, stable LiDAR sensor transmitter.
No takes yet. Share an insight, caveat, or question.
Li et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: