Answers are grounded in this paper and cite their sources.
This study presents a comprehensive numerical and experimental investigation of novel three-dimensional elliptical anti-chiral (3D EAC) auxetic metastructures for energy absorption applications. Specimens were fabricated via direct metal laser sintering (DMLS) with 20MnCr5 steel and subjected to quasi-static compression testing, revealing three distinct deformation stages: approaching, flattening, and densification. A validated finite element model was developed to investigate the influence of geometric parameters—the semi-axis ratio ( α ) and thickness-to-semi-major-axis ratio ( β ) —on deformation mechanisms and energy absorption performance. Results demonstrate that geometric parameters strongly govern the crushing response: increasing α reduces plateau strain and stress while weakening the negative Poisson’s ratio (NPR) effect, with specific energy absorption (SEA) peaking at α = 0 . 5 ; increasing β reduces plateau strain, increases plateau stress, diminishes NPR magnitude, and enhances SEA. The 3D EAC exhibits up to three plateau stages and densification strains up to 75%, enabling exceptionally high energy absorption. Comparative analysis indicates that the 3D EAC achieves substantially superior energy absorption relative to the 2D EAC, with mean SEA improvements up to 127.0% (ranging from 18.8% to 211.3%), which is attributed to additional plateau stages and higher effective porosity. Benchmarking against other 3D auxetic metastructures confirms the 3D EAC’s superior energy absorption, with mean SEA improvements ranging from 34.2% to 160.0%. For the configurations tested, the 3D EAC demonstrates geometric robustness and stable crushing behaviour, suggesting potential for engineering energy absorption applications.
No takes yet. Share an insight, caveat, or question.
Andika et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: