Answers are grounded in this paper and cite their sources.
We have studied frequency-modulated continuous-wave (FMCW) light detection and ranging which uses externally modulated light instead of a wavelength-chirped laser diode and a complicated clock sampling circuit. In this method, the FMCW beat signal is accompanied by a 3 dB average loss in principle when pseudo frequency-modulated light simply generated by an intensity modulation with frequency-swept signals is used. In this article, we first fabricated a Si in-phase/quadrature-phase modulator equipped with compact photonic-crystal phase shifters and generated carrier-suppressed single sideband modulation signals. Furthermore, we obtained almost ideal frequency modulation, with a side-mode suppression ratio of 22.3 dB, by temporally controlling the frequency and phase of the modulation signals. When the FMCW beat signal was produced with this modulated signal in a fiber delay interferometer, its intensity was increased by 5.3 dB, as compared with that using intensity modulation. This improvement corresponds to an 80% increase in the limit distance of FMCW ranging. We also generated similar signals using a single modulator with a bypass waveguide, which simplified modulation. The side-mode suppression ratio for the frequency-swept modulation was limited to 9.8 dB, while comparably large increase in the beat intensity was confirmed.
No takes yet. Share an insight, caveat, or question.
Kamata et al. (2020) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: