Answers are grounded in this paper and cite their sources.
Anisotropy has a significant impact on the elastic and mechanical properties of rocks. Misidentifying a rock formation as isotropic can lead to significant errors in predicting stress distribution and mechanical deformation in the subsurface. Sandstone-shale laminated rocks are intrinsically anisotropic and are of great interest in subsurface engineering applications, as they constitute important assets in global oil and gas reserves. Under specific conditions (layer thickness, property contrast), these rocks can be effectively represented by an equivalent homogeneous transversely isotropic (TI) medium. The elastic moduli of the TI medium are calculated as the product of the properties of each layer and their respective thicknesses. We examine the latter concept through laboratory testing and angle-dependent ultrasonic reflection-coefficient measurements. Experimental data acquired from synthetic 3D-printed layered samples with varying layer thicknesses (smaller or greater than the receiver size) are compared with semi-analytical and numerical simulations. This comparative analysis yields valuable insights into the resolution of the method and helps to determine the conditions under which spatially heterogeneous samples can be accurately represented by effective-medium models of elastic rock behavior. Laboratory measurements acquired in a controlled environment confirm that samples characterized by weak anisotropy and layer thickness smaller than the receiver diameter can be accurately represented by an equivalent vertical TI medium. However, the receiver size-to-layer thickness condition is only valid under the assumption that the receiver aperture spans several wavelengths and that the measurements are subject to spatial averaging. Noteworthy differences arise when measurements are taken parallel and perpendicular to the sample bedding plane. Measurements acquired perpendicular to the layering reflect the properties of the effective medium. Reflection coefficients acquired parallel to the layers can effectively capture the elastic properties of the layer with differences below 5% compared with the homogeneous material.
No takes yet. Share an insight, caveat, or question.
Olszowska et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: