Answers are grounded in this paper and cite their sources.
Hard carbon (HC) is a promising anode material for all-solid-state lithium-ion batteries (ASSLIBs) owing to its high capacity and minimal volume expansion. This study systematically investigates the impacts of carbonization temperature (600–1400 °C) and particle size (15 μm vs. 330 nm) on the HC performance in sulfide-based ASSLIBs. We demonstrate that "open-porous" HC, typically unsuitable for liquid-electrolyte LIBs because of excessive electrolyte decomposition within the internal pores, exhibits exceptional performance in a solid-state configuration. Specifically, the larger HC carbonized at 900 °C delivered a high plateau discharge capacity (200 mAh g−1) and superior initial Coulombic efficiency (ICE) in ASSLIBs because the solid electrolyte cannot penetrate the internal micropores, thereby preventing electrolyte decomposition while allowing quasi-metallic lithium cluster formation. Although smaller HC led to lower ICE due to increased interfacial areas, they provided enhanced rate capability and superior short-term durability by suppressing absolute resistance growth. These findings reveal that design principles for ASSLIB anodes significantly deviate from those for liquid systems, where highly porous carbons can be effectively utilized. This study establishes critical material design guidelines for next-generation carbonaceous anodes in all-solid-state architectures.
No takes yet. Share an insight, caveat, or question.
Miyahara et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: