Air Cuff Transducer Design for Occlusion-Based Hemodynamic Measurements—An Experimental and Simulation Study

In standard clinical practice, cuff devices are widely used for non-invasive blood pressure measurements (NIBP). However, cuff-based NIBP is prone to large errors especially in cases of hypo- and hypertension. In addition to this, the cuff measurement principle allows for estimation of a number of other hemodynamic parameters (e. g. cardiac output, arterial stiffness, augmentation index) by means of analysis of the pulse waveform and/or pulse amplitude recorded in the cuff pressure. However, in standard practice, the cuff is still only used for the measurement of BP.A key reason for the observed measurement errors and the limited set of extracted parameters lies in our poor understanding of the cuff device as a transducer; the cuff pressure response to arm volume pulsations (the cuff transfer functionTFcuff) depends on a large number of factors. It is not yet clear to what extent the cuff contributes to the NIBP error, or if the cuff in its current format is reliable for measurement of arterial pulse waveform/amplitude. In this study, we investigate the isolated cuff in order to gain a better understanding of the main sources of measurement errors. By using an experimental setup which measures the cuff response to mechanically simulated arm pulsations, we find that the cuff can explain part of the NIBP errors in cases of hypotension. Also, we find that pulse waveforms can be estimated using a standard cuff; however, measurement of the pulse volume amplitude is unfeasible. We demonstrate that the observed inaccuracies can be eliminated by usage of a calibrator device which obtains real-time information onTFcuff. These findings will enable further investigation of the effects related to the pulse travel along the compressed limb and the interaction between cuff, arm tissue, distal arm hemodynamics and arterial walls for the development of improved occlusion-based measurement strategies.