This is the authors' abstract. We don't add key points for this paper.
Visible-light active Co-Si co-doped TiO 2 powders with varying dopants concentration were successfully synthesized by simple precipitation method followed by annealing at 350, 600 and 900 °C. Structural and morphological characterization was performed using SEM, TEM, XRD, XPS, FT-IR, FT-Raman, UV–vis and PL spectroscopy. X-ray diffraction and Raman spectroscopy confirmed that materials annealed at 350 and 600 °C consist of anatase as the main phase, while those treated at 900 °C are multiphase composites consisting of anatase, rutile, and CoTiO 3 . FT-IR spectroscopy revealed the presence of functional groups related to SiO 2 and CoTiO 3 phases. UV-vis spectra of co-doped TiO 2 showed a red-shifted absorption edge and absorption peaks in the visible spectral range near 610 nm. Band gap energy estimated from Tauc’s plots showed a significant decrease with Co doping, reaching a minimum of 2.25 eV at a Co/Si ratio of 0.17. Formation of additional defect levels located in the optical band gap due to co-doping was confirmed by photoluminescence spectroscopy. XPS analysis revealed that cobalt was present in the +2-oxidation state. The prepared Co-Si co-doped TiO 2 materials showed photocatalytic activity in the reaction of phenol red degradation under visible light, with maximum photodegradation efficiency of above 90% in 120 min discovered for samples annealed at 350 and 600°C. These results suggest that Co-Si co-doped anatase TiO 2 offer improved photocatalytic performance for application in wastewater purification under sunlight.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Khalyavka et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: