Answers are grounded in this paper and cite their sources.
Highly crystalline LiFePO 4 nanorods have been synthesized within a short reaction time of 5−15 min at <300 °C by a novel microwave-solvothermal (MW-ST) process and a microwave-hydrothermal (MS-HT) process. In order to improve the electrical conductivity, both an ex situ carbon coating by heating at 700 °C with sucrose the LiFePO 4 obtained by the MW-ST method and an in situ carbon coating by carrying out the MW-HT process in presence of glucose (MW-HT carbonization) followed by heating at 700 °C have been pursued. The products have been characterized by X-ray diffraction, scanning electron microscopy (SEM), transmission electron microscopy (TEM), Raman spectroscopy, and charge−discharge measurements in lithium cells. The MW-ST method offers smaller size nanorods (25 ± 6 nm width and up to 100 nm length) compared to the MW-HT method (225 ± 6 nm width and up to 300 nm length). Annealing at 700 °C improves the rate capability and cyclability significantly without much particle growth due to an improvement in the structural order of carbon and electronic conductivity. Moreover, the LiFePO 4 /C nanocomposite obtained by the MW-ST method offers higher initial discharge capacity than that obtained by the MW-HT method due to a smaller particle size, illustrating that both lithium ion diffusion and electronic conductivity play a critical role in controlling the electrochemical properties.
No takes yet. Share an insight, caveat, or question.
Murugan et al. (2008) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: