Answers are grounded in this paper and cite their sources.
Biopolymer-based porous materials are attracting increasing interest as sustainable alternatives to conventional thermal insulation foams; however, achieving low thermal conductivity together with adequate mechanical performance and fire response remains challenging. Building on previous formulation screening, this study investigates alginate-expanded perlite xerogel foams modified with chitosan and glycerol for thermal insulation applications. Foams were prepared via in situ CO2 foaming and Ca2+ crosslinking, followed by mild oven drying. The effects of expanded perlite (9–12%), glycerol (0–10%), and chitosan (0–1%) were systematically investigated. All formulations exhibited low thermal conductivity (0.0467–0.0525 W m−1 K−1) and UL-94 V-0 self-extinguishing behavior. Incorporation of dispersed chitosan significantly enhanced compressive strength, reaching 263 kPa at 10% strain, within the range of commercial polymer foams. Image analysis and SEM showed that chitosan suppressed bubble coalescence, reduced large-pore fractions, and improved particle coverage, yielding structurally coherent matrices. Glycerol primarily acted as a plasticizer, improving the dimensional stability, but contributing less to pore refinement. The developed foams combine competitive thermal insulation performance, self-extinguishing behavior, and mechanical properties suitable for self-supporting insulation applications through a simple, water-based manufacturing route, highlighting their potential as sustainable alternatives to conventional fossil-based insulation materials for building applications.
No takes yet. Share an insight, caveat, or question.
Damjanović et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: