Answers are grounded in this paper and cite their sources.
The scope of this study is to propose a new and convenient method for reduction of acidity of heavy crude oils to less than 1 mg KOH/g of sample. For this purpose, acidity of several Iranian heavy crude oils has been investigated. Is this research, two precise methods were developed and the results compared for the acidity reduction of samples based on using nanofluid demulsifiers. In the first technique, after separating the formation water and salt of the samples, the acidity was determined potentiometrically on the treated samples by using trace quantities of a commercial polymer-based nanofluid demulsifier. In the second technique, distillation of crude samples was performed according to ASTM standard procedures and the related fractions were subsequently evaluated for acidity measurements. The results obtained from both separation techniques revealed that the formation water of crude samples is responsible for the presence of salt and some organic acids such as naphthenic acid and its derivatives. Here, the acidity removal techniques are ideally suited for heavy Iranian crude oils with water content between 0.05-20 vol.% and salt between 10-10000 pounds per thousand barrels (ptb).
No takes yet. Share an insight, caveat, or question.
Mostafavi et al. (2017) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: