Answers are grounded in this paper and cite their sources.
Pumping of fluids in microchannels using the movement of a single or multiple vapor bubble(s) is proposed, analyzed, and demonstrated. The pumping mechanism requires no micromechanical moving parts for actuation by utilizing asymmetric heating which creates a variation in vapor pressure and surface tension due to the heater-induced temperature gradient along the channel. A heat and mass transfer analysis was performed to understand the pumping mechanism and estimate the pumping capability of the micropumping device. To verify the concept and our analysis, a pumping device with a transparent microchannel with a hydraulic diameter of 3.4 μm was fabricated on a silicon wafer using surface micromachining. Experimental results with the first generation device have shown pumping of isopropanol at velocities as high as 160 μm/s (0.5 nl/min flow rate) with a pressure head of approximately 800 Pa.
No takes yet. Share an insight, caveat, or question.
Jun et al. (1998) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: