This is the authors' abstract. We don't add key points for this paper.
We report on a widely tunable MEMS airflow velocity sensor, based on the initially curved bistable microbeam resonant frequency monitoring. The tunability and enhanced frequency sensitivity are achieved by operating the device near the snap-through instability threshold, which is adjusted by a steady electrostatic preloading and a low-power Joule heating. In this work, the 500 μ m long, 25 μ m wide, and 2 μ m thick bell-shaped single-crystal Si beam, with 2.5 μ m midpoint elevation, is driven by a time-harmonic electrostatic force, and the beam’s resonant frequency is tracked using a phase-locked loop (PLL) with a 1 kHz bandwidth. The sensor was first used in a steady rectangular jet, demonstrating its response to the flow through both mechanical and thermal mechanisms. Our experimental results show that the sensor’s sensitivity to mean airflow velocity can be widely adjusted by varying the heating and electrostatic preloading parameters. Subsequently, the unsteady flow from a fluidic oscillator was measured, accurately capturing the flow dynamics, which was also monitored by a conventional hot-wire anemometer. The results show that the sensor can resolve unsteady flow velocity over the 10–100 Hz bandwidth. Overall, the suggested sensing approach is highly promising because its frequency-based output offers inherent noise immunity, while its unique tunability allows a single device to be optimized for diverse applications, from subtle, low-velocity flows to high-velocity unsteady flows.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Литвинов et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: