Answers are grounded in this paper and cite their sources.
Minnesota Impedance Cardiography offers a non-invasive method to measure cardiac output and stroke volume during laparoscopy in healthy patients.
There have been several reports of cardiac output measurements during laparoscopy for gynaecological purposes, using dye dilution techniques. 1-3The results of these investigations have been somewhat equivocal.Motew et aL2 reported that no changes occurred up to an intra-abdominal pressure of 20 mmHg and only small and insignificant changes above that pressure.Kelman et al.' demonstrated increases in cardiac output at intra-abdominal pressures up to 20-30 cmH,O, and a fall with pressures above 40 cmH,O.Techniques for measuring cardiac output which involve arterial and central venous cannulation did not seem appropriate to us in healthy patients undergoing a relatively minor surgical procedure.It was therefore decided to measure cardiac output during laparoscopy using a Minnesota Impedance C a r d i ~g r a p h .~-~ This is a non-invasive technique which enables repeated measurements to be made at short time intervals.The values of stroke volume produced correlate satisfactorily with other methods currently and, in particular, with electromagnetic flowmeters' which also measure stroke volume on a beat by beat basis. Impedance cardiographyThis technique is based on the observation that if an alternating current is passed across the thorax it is possible to demonstrate that there is a change of electrical impedance with each cardiac cycle.A constant sinusoidal alternating current of 4 mA RMS at 100 kHz is passed between electrodes 1 and 4 and the transthoracic impedance is measured between the inner two electrodes 2 and 3 (Fig. I).These impedance changes with each cardiac cycle (Az) are differentiated to produce the trace -(Fig.2).
No takes yet. Share an insight, caveat, or question.
Lenz et al. (1976) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: