Answers are grounded in this paper and cite their sources.
Experimental study demonstrates self-healing and thermal stability in microcapsule-loaded photocurable resins, suggesting extended durability for 3D-printed manufacturing tooling.
Additively manufactured resin molds are susceptible to thermomechanical failure and accumulated damage during molding processes, severely limiting their service life. To address this, a thermally stable self-healing photocurable resin was developed for liquid crystal display (LCD) 3D printing. Microcapsules (MCs) comprising a commercial E51-grade epoxy resin core and a melamine–urea–formaldehyde (MUF) shell were incorporated into the photocurable matrix together with an amine curing agent to enable crack repair. At 7 wt % MCs, the optimized formulation showed a healing efficiency of 68.97% after healing at 60 °C for 12 h. It exhibited a 5% mass-loss temperature of 372.1 °C, a maximum mass-loss-rate temperature of 428.1 °C, and short-term shape retention after treatment at 240 °C for 4 h. Open-ended internal channels were fabricated and demonstrated room-temperature flow connectivity. Representative molds were further printed and used for silicone molding, demonstrating the potential of the optimized formulation for repairable LCD-printed resin molds requiring short-term heat resistance.
No takes yet. Share an insight, caveat, or question.
Li et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: