Answers are grounded in this paper and cite their sources.
SF 6 is generally treated as thermally stable and inert for applications below 500 °C. This work investigates the thermal stability of pure SF 6 gas under 1.2 atm pressure between 200 and 450 °C in the presence of construction metals (Cu, Al), without any applied electric field. The obtained experimental results indicate that SF 6 may react with metallic surfaces forming solid and gaseous by-products, either in the gas matrix or diffused in the metallic surfaces. The phenomenon is enhanced in the presence of adsorbed moisture. For copper surfaces, sulfide layers are formed. By-products are not formed for pure Al surfaces. However, when Al is covered by a few micrometres thick Al 2 O 3 film, hot SF 6 molecules have a structure change effect, i.e. reduce porosity in the oxide and in the substrate, provide smooth transition layers Al/Al 2 O 3 and increase the Al 2 O 3 layer width. In the presence of moisture this phenomenon is significantly intensified and a diffused overlayer of AlF 3 also forms. The by-products in the gas matrix are mainly sulfur oxides for hot spot temperatures below 300 °C, while at higher temperatures oxyfluorides SO 2 F x and HF are mainly formed. These by-products are either toxic or corrosive. Thus, the thermal stability issue of SF 6 may have to be reconsidered.
No takes yet. Share an insight, caveat, or question.
Dervos et al. (2007) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: