Answers are grounded in this paper and cite their sources.
This article presents a novel multiport bidirectional dc–dc converter (MP-BDC) by featuring a two-phase interleaved architecture at each low-voltage port to mitigate current ripple across the low-voltage side capacitors and inductors. The multiport configuration is designed to enable the simultaneous utilization of energy storage systems (ESSs) with different voltage levels, while also achieving a wide voltage conversion ratio. In order to ensure the balanced average inductor current across the entire duty cycle range, a cost-effective asymmetric duty-cycle limit control strategy is implemented, which demonstrates the robust performance against variations in the dc inductors. Moreover, the proposed converter is well-suited for integrating various renewable energy resources and hybrid ESSs. In addition, the low-voltage ports are configured to share a common ground with the high-voltage port, which helps reduce electromagnetic interference within the system. The operating principles, device stresses, current ripple characteristics, and design procedures in the proposed MP-BDC are comprehensively analyzed. The essential performances are demonstrated by a 2.5 kW–50 kHz prototype with dual low-voltage dc ports (72 and 48 V) and a single high-voltage dc port (400–800 V) utilizing silicon carbide metal-oxide-field-effect-transistors (SiC-mosfets). The maximum efficiencies are measured as 98.04% with a high-voltage port of 400 V and 98.46% with a high-voltage port of 800 V, respectively. These results demonstrate the effectiveness of the proposed MP-BDC and highlight its potential for high-power applications, such as EV fast charging and renewable energy integration.
No takes yet. Share an insight, caveat, or question.
Liu et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: