Answers are grounded in this paper and cite their sources.
We evaluate the response of T-shaped, asymmetric, piezoresistive, micromachined cantilevers fabricated on p-type Si to 10-keV X-ray irradiation. The resonant frequency decreases by 25 ppm at 2.1 Mrad(SiO2), and partially recovers during post-irradiation annealing. An explanation of the results is proposed that is based on radiation-induced acceptor depassivation. This occurs because radiation-generated holes release hydrogen from previously passivated acceptors, causing the carrier concentration to increase, especially near the surface. Increased carrier concentration decreases Young's modulus, resulting in a decrease in the cantilever resonant frequency. Finite element simulations show that the effect of a decreasing Young's modulus in the surface region is consistent with the measured decrease in resonant frequency in the irradiated devices.
No takes yet. Share an insight, caveat, or question.
Gong et al. (2016) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: