Answers are grounded in this paper and cite their sources.
The magnetic properties of RF sputtered Co-Cr films have been studied over a range of preparation conditions extending previous work. Reproducible well-developed perpendicular anisotropy, as would be required for perpendicular recording, was found when the deposition conditions were maintained at an optimum of 170°C substrate temperature, 1.5 KV RF voltage and 5 microns argon pressure. Film thickness was nominally 1 micron. The optimum deposition rate in our system was 120 angstroms/minute due to the differential sputtering rates of Co and Cr. The resulting films had coercivities up to 1500 oersteds and (00.2) hcp X-ray peak width ΔΘ50of 5 degrees, with secondary X-ray peaks observed as well. Columnar growth was observed with grains less than 800 angstrom diameter. A sublayer of poor orientation was observed. Magnetic moment was observed to be about 35% higher than that reported by Iwasaki. Initial background pressure less than 6 × 10-7torr was essential for formation of well-oriented films. The presence of nitrogen caused the appearance of the fcc phase and the loss of perpendicular coercivity. Loss of coercivity also occurred when film composition was nonuniform.
No takes yet. Share an insight, caveat, or question.
Coughlin et al. (1981) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: