Answers are grounded in this paper and cite their sources.
Electrode dissolution/collapses and interfacial reactions pose challenges to batteries, leading to pronounced capacity loss particularly during the initial few cycles. As high‐capacity conversion/alloying anodes for sodium storage, metal sulfides generally show unsatisfactory performances like poor initial Coulombic efficiency (ICE; mostly <70% in the usual electrolyte) and inferior cyclic stability due to thick solid‐electrolyte interface (SEI) layer formation and ubiquitous volume/phase changes. Using SnS 2 as an example, here, sulfides are elaborately encapsulated into functionalized amorphous tridymite/carbon reactors to address the above issues. The outer tridymite/carbon manifests good ionic permeability and superb electrochemical/mechanical tolerance against destructive Na + insertion. Confining actives into tailored reactors endows SnS 2 full of nanoboundaries with an ultrahigh ICE of ≈89.13% and remarkable electrochemical attributes including large initial capacity (Max. 733.24 mAh g −1 ), prominent stability in subsequent cycles, and excellent rate capability. Detailed investigation unveils that thin and steady SEI condition on tridymite/carbon rather than SnS 2 is key to achieving outstanding ICE. Engineered reactors always keep intact and free of valence‐state changes, guaranteeing capacities running at a high level without an evident downtrend. Their peculiar functions on enlisting Na + diffusion/transport and inhibiting sulfides’ release are also discussed. Packed full‐cell Na‐ion batteries with less irreversibility may show great potential in practical utilizations.
No takes yet. Share an insight, caveat, or question.
Liu et al. (2021) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: