This is the authors' abstract. We don't add key points for this paper.
In this paper, a Fe, Cr-rich multiphase Ni 3 Al-based alloy is joined through transient liquid phase bonding (TLP) technique. Different from typical γ+γ′ dual phase Ni 3 Al-based alloys, the joint can be divided into three distinct zones: isothermal solidification zone (ISZ), gamma prime zone (GPZ) and diffusion affected zone (DAZ). Interestingly, the massive fine grains with γ+γ′ dual phase are observed inside the ISZ, and the GPZ consists of blocky γ′ phase. The precipitation of Cr-rich borides in DAZ provides an advantageous compositional condition for the local coarsening of γ′ phase. In addition, hardness value of the bonded samples fluctuates from the centerline to the BM and reaches the peak at the DAZ. The bonded specimens share equivalent room-temperature tensile strength and elongation to failure with the parent metal after the weld thermal cycle. Moreover, the fracture path propagates along the base metal (BM), which indicates excellent tensile properties of the joint.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Hu et al. (2022) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: