Answers are grounded in this paper and cite their sources.
Thin films of noble metals are considered to be important materials for microelectronics applications. In this study, Ru thin films were deposited on SiO 2 /Si substrates by RF magnetron sputtering using a mixture of Ar and O 2 gases, and the effects of O 2 flow ratio, substrate temperature and film thickness on the crystal orientation and surface roughness of the films were studied. Single orientation (001) Ru thin films were formed under appropriate conditions, such as O 2 flow ratios lower than that required for RuO 2 formation and high substrate temperatures. A minimum full-width at half-maximum of 1.2° was obtained for the rocking curve of the Ru (002) X-ray diffraction peak. The average surface roughness ( R a ) of the single orientation films was estimated to be approximately 1 nm by atomic force microscopy. The oxygen introduced during sputtering was thought to play a role as a surfactant.
No takes yet. Share an insight, caveat, or question.
Abe et al. (2004) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: