This is the authors' abstract. We don't add key points for this paper.
Barium titanate (BaTiO 3 ) ceramics with a density of more than 98% of the theoretical value were fabricated by two-step sintering method from hydrothermally synthesized BaTiO 3 nano-particles of 100 nm. The average grain size was around 1.6 µm and the biggest one was controlled less than 3 µm. Dielectric constant ε r33 T of the poled samples was 5000 and electromechanical coupling factor k p was 42%. Large piezoelectric constants d 33 = 460 pC/N and d 31 = -185 pC/N were measured by a d 33 -meter and the resonance–antiresonance method, respectively. A high Poisson's ratio σ= 0.38 was determined from the ratio of overtone frequency and resonant frequency in the planar mode. The high Poisson's ratio and the large dielectric constants are most likely the origin of the high d 33 of the ceramics. The discovery of high d 33 in non-lead-based BaTiO 3 ceramics with low cost process has important practical consequences in addition to scientific interest.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Karaki et al. (2007) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: