Answers are grounded in this paper and cite their sources.
We have developed a 4.2 K, flux locked, tuned d.c. SQUID amplifier to improve the SNR of a low field MRI system operating at 0.01 T (425 kHz). The flux locked loop, based on the Direct Offset Integration Technique, has a noise level of 2.6 /spl mu//spl Phi//sub 0/ Hz/sup -1/2/ and a slew rate of 1.6/spl times/10/sup 6/ /spl Phi//sub 0/ s/sup -1/ at 425 kHz when used with a commercially obtained SQUID. The high intrinsic Q-factor of the MRI pick-up coil is damped by the action of the loop and by an additional feedback circuit to provide imaging bandwidths of up to 10 kHz. We have developed a special low noise liquid helium cryostat so that the final system has a magnetic field resolution of 0.08 fT Hz/sup -1/. This receiver was used in a small scale MRI system to image non-conducting test objects and the human arm. The images show significant improvements in SNR over those obtained with an equivalent room temperature receiver.
No takes yet. Share an insight, caveat, or question.
Seton et al. (1997) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: