Answers are grounded in this paper and cite their sources.
A zein/ethyl cellulose (EC) composite film was prepared for aqueous systems, with mechanical properties and water solubility as evaluation indicators. The optimal conditions were zein/EC mass ratio of 1: 9, ethanol concentration of 93 mL/dL, 0.3 g/g glyceryl dioleate (GD), and curing temperature of 60 °C. Under these conditions, after one-month water soaking, the film showed a tensile strength of 11.61 MPa and an elongation at break of 43.60%, with no obvious oil permeation within one week. The film exhibited low water solubility with values ≤ 0.010%. FTIR analysis indicated zein and EC were physically combined; SEM analysis showed GD improved their compatibility, presenting more uniform surface; water contact angle analysis demonstrated composite film exhibited good hydrophobicity; and DSC analysis revealed composite film possessed better thermal stability. The film acted as a coating to apply in walnut, hazelnut, and peanut chunks for nut-containing jam preparation. A 3-month storage experiment at 25 °C showed the coating reduced the average oil seepage rate of jams from 1.97% to 0.18%, effectively inhibiting oil seepage; acid value and peroxide value of oils in all samples met the limits regulated by the National Standard. This coating significantly improves the storage stability of nut-containing jams in aqueous systems.
No takes yet. Share an insight, caveat, or question.
Wang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: