Answers are grounded in this paper and cite their sources.
Solar energy is a non-vanishing renewable energy source which is abundantly available and eco-friendly. This solar energy can be converted into useful electricity by using two different ways photovoltaic and photo-thermal. But studies have found out that the performance of the solar photovoltaic cells degrades as the temperature of the panel increases because of higher solar irradiation intensity acting on the solar panel. So necessary cooling systems have to be established to increase the lifespan and efficiency of the panel. The efficiency of the solar panel available in the market are around 15%. This project comprises of comparison of different passive cooling systems in photovoltaic cell and to find the best cooling system which gives better performance. One such passive cooling system is the phase change materials (PCM) which has the ability to absorb heat from the panel and release it to the atmosphere when it undergoes phase change. Here OM 35 is used as a PCM which was selected based on the ambient temperature of the region where the experiment is to be conducted. Another passive cooling method is by using extended surface called fins where heat transfer takes place with the help of conduction, convection and radiation to cool the solar panel. And finally, we are going to make a PCM and fins hybrid cooling system and compare its output with individual fins and individual PCM cooling system. From this experiment we observed that integration of different passive cooling technique improved the performance of PV panel in terms of power output and efficiency. The incorporation of the three systems enhanced the entire performance of the PV panel but the fin cooled system has more efficiency enhancement compared to the other two cooling systems. Maximum temperature reduction was also shown by the panel with fin and it is about 10.37 °C. Hybrid system only reduces 5.5 °C and PCM systems reduces 4. 4°c.This different passive cooling techniques will reduce the induced thermal stress in the PV panel thereby increasing its overall lifespan.
No takes yet. Share an insight, caveat, or question.
Aswin et al. (2025) studied this question.