Answers are grounded in this paper and cite their sources.
Modern smart electronic and information technology (IT) devices require a low DC voltage for operation. The low supply voltage is typically provided by a dedicated DC−DC converter by stepping down the system’s bus voltage (e.g., 12 V). It is essential that the converter possesses a large voltage step-down gain and, at the same time, operates at high efficiency. A tapped inductor buck converter (TIBC) is a topology that has a potential to meet these requirements. It has a simple circuit structure and high efficiency similar to a buck converter, but can give a larger voltage step-down gain. This paper presents a dynamic modeling and closed-loop control of a TIBC. The state space averaging (SSA) method is adopted for the dynamic modeling to derive small-signal transfer functions of the converter. Based on the duty-cycle-to-output voltage transfer function, a closed-loop control is designed to keep the converter’s output voltage constant. To verify the design, a prototype TIBC with closed-loop control is implemented. Experimental results show that the prototype converter has good output voltage regulation and fast transient response when subject to a step load. The effect of the crossover frequency and phase margin on the converter’s transient response is also illustrated.
No takes yet. Share an insight, caveat, or question.
Trakuldit et al. (2021) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: