Answers are grounded in this paper and cite their sources.
To improve the optoelectronic properties of iron oxide as a photoelectrode, hematite (α-Fe2O3) thin films were doped with titanium using atmospheric pressure chemical vapor deposition (APCVD) for synthesis. The films were prepared by pyrolysis of Fe(CO)5 and TiCl4 precursors on fluorine-doped tin oxide (FTO) substrates and found to have a polycrystalline morphology with faceted particulates ∼20 to 50 nm in size with a preferred crystallographic growth along the [110] direction. The performance of the photoanodes was measured as a function of titanium concentration. A maximum efficiency was observed at ∼0.8 atom% Ti in hematite. The Incident Photon-to-current Conversion Efficiency (IPCE) to hydrogen was measured in alkaline electrolyte. Under an applied bias of 0.6 V vs.Ag/AgCl at 400 nm the IPCE for water splitting in alkaline solution was found to be 27.2%, the highest efficiency reported for Ti doped hematite photoanodes. The IPCEs of the photoanode thin films at lower applied bias were further increased by calcination at 500 °C and by use of glucose as an anolyte.
No takes yet. Share an insight, caveat, or question.
Zhang et al. (2011) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: