Answers are grounded in this paper and cite their sources.
The performance of a solar cell is greatly affected by the Schottky barrier at the back contact. For a standard modelling of a good solar cell, care is to be taken on the fabrication of the back surface field (BSF) giving rise to the Schottky barrier. The authors have undertaken an exhaustive study through modelling and simulation to investigate the photocarrier dynamics at different Schottky barrier heights at the back contact for different combinations of material thicknesses of BSF as well as absorber layers. The study achieved the highest efficiency η of 18·48%, open-circuit voltage V oc of 0·6641 V, short-circuit current I sc of 0·343 A and fill factor of 81·44% for 0·1 μm absorber and 1 nm BSF layer thickness. As a conclusive remark on the investigation, it may be asserted that for simultaneous ultrathin films of both the BSF and the absorber layers, the performance of the solar cell was almost independent of the Schottky barrier height.
No takes yet. Share an insight, caveat, or question.
Sarkar et al. (2018) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: