Answers are grounded in this paper and cite their sources.
Lithium-ion batteries (LIBs) generate substantial heat under high cyclic charge–discharge scenarios, which leads to excessive temperature rise and temperature nonuniformity, posing challenges to battery safety and performances. Conventional single cooling methods usually cannot simultaneously meet the requirements of maximum temperature and temperature uniformity under high heat flux conditions. Therefore, hybrid thermal management systems have become a promising solution. This study develops a hybrid thermal management system that combines composite phase change material (CPCM), heat pipes, and forced air cooling, aiming to effectively address the overheating and temperature inhomogeneity issues of LIBs in high-power operating conditions. Paraffin/expanded graphite CPCM is employed as a thermal buffer to enhance temperature uniformity through its high latent heat capacity. Embedded heat pipes efficiently extract the heat accumulated in the CPCM, while fin-assisted forced air cooling dissipates heat at the condenser section of the heat pipes, resulting in an efficient thermal management. A multiphysics model for the proposed hybrid thermal management system is developed through the finite element method in the COMSOL Multiphysics software. The effects of key structural and operating parameters, including battery spacing, fin number, and inlet air velocity, on the thermal performance of the system are analyzed. The results indicate that the hybrid system can limit the maximum battery temperature around 43 °C with a maximum temperature difference less than 1.5 °C under 4C cycling. Optimized parameters of fin number and inlet air velocity are examined to balance the latent heat utilization and temperature uniformity in the system. The analysis of heat flow rate of the system reveals the synergistic mechanism among multistage heat transfer, which lays foundation for designing and optimizing the hybrid thermal management system. This study demonstrates that the proposed hybrid CPCM–heat pipe–air cooling strategy provides an effective and reliable solution for the thermal management of LIBs.
No takes yet. Share an insight, caveat, or question.
Wang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: