Answers are grounded in this paper and cite their sources.
Oil-derived middle distillates (straight-run gas oil and mixture with light cycle oil and coker gas oil) for Ultra-Low Sulfur Diesel (ULSD) production by HyDroTreating (HDT) were pretreated by selective Nitrogen Organic Compounds (NOC) adsorption. Highly crystalline Metal-Organic Framework (MOF) MIL-101(Cr) prepared with propylene oxide (proton scavenger) as textural improver was used to that end. MOF was characterized by N 2 physisorption, X-ray diffraction, thermal analysis, infrared, Raman and UV-vis spectroscopies, and electron microscopy (SEM and HR-TEM). NOC removal was carried out at room temperature and atmospheric pressure, the adsorbent being easily regenerable under mild conditions. Extruded MOF efficiently removed NOC from real feedstocks to concentrations ~ 80 ppm which allowed ULSD production at much milder conditions to those used during pristine feedstocks HDT. Operating temperature could be significantly diminished (from 350 to 330 °C, at 56 kg cm −2 (5.77 MPa), LHSV = 1.5 h −1 , H 2 /oil = 2500 ft 3 bbl −1 (445 m 3 m −3 )) which could notably prolong cycle life of NiMo/Al 2 O 3 formulation used.
No takes yet. Share an insight, caveat, or question.
Meneses-Ruiz et al. (2021) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: