Answers are grounded in this paper and cite their sources.
When wool fibres are impregnated with a dilute solution of ferrous ammonium sulphate, dried, and then treated with a solution of methacrylic acid containing a trace of hydrogen peroxide, preferential internal polymerisation is brought about by the hydroxyl radicals formed inside the fibres when the hydrogen peroxide encounters the ferrous ions. The reaction proceeds best at low j>H values in absence of oxygen. Preferential internal polymerisation of water–insoluble monomers can also be brought about if they are emulsified with Lissolamine V, and no difficulty has been encountered in forming copolymers of methacrylic acid and methyl methaerylate, for example, within the fibres. Such internal deposits of polymer can be used to modify the properties of wool in a number of ways. When the polymer is acid, two–tone effects can be obtained by dyeing treated and untreated wool in the same dyebath, the treated wool taking a lighter shade. Conversely, when the polymer is basic, the treated wool takes a darker shade. In addition, internal deposits of polymer are capable of increasing the wear–resistance and reducing the milling shrinkage of wool fabrics. Finally, if the monomer carries reactive side–chains, e. g. methacrylamide, internal polymerisation followed by cross–linking with formaldehyde causes a striking increase in the resistance of wool fibres to extension in water. It is not yet known whethor cross–linkages are formed between the polymer and the wool, but reactions of this type should be useful in strengthening intact fibre and repairing damaged fibres.
No takes yet. Share an insight, caveat, or question.
Lipson et al. (1949) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: