Answers are grounded in this paper and cite their sources.
This study investigates the changes in scouring depth and location at the outlet of a culvert under various flow conditions, using numerical simulation to model flow and sediment interactions. Ansys Fluent was employed in this study to simulate various flow rates, inlet blockages (0% and 40%), and sediment sizes (0.85 mm and 2 mm). The numerical results were validated by comparing them with experimental data and numerical simulations from Flow-3D, utilizing two turbulence models, Renormalization Group (RNG) and k-ε. The findings indicate that the RNG model more closely matched observational data, particularly under the 40% blockage condition, while both models agreed well under the 0% blockage condition. Increased flow rates and higher inlet blockage led to greater scour depths. In the 40% blockage condition, the maximum scour depth in the RNG model was 200% and 150% greater than the Fluent model, respectively. Additionally, the study found a 30% increase in maximum scour depth when sediment particle size increased from 0.85 mm to 2 mm. This research highlights the importance of selecting the appropriate turbulence model for accurate scour predictions and offers valuable insights that can inform the design and maintenance of culverts and related infrastructure.
No takes yet. Share an insight, caveat, or question.
Ahmed et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: