Answers are grounded in this paper and cite their sources.
Amine-functionalized magnetite (nFe3O4-NH2) of two different sizes, 10 nm and 250 nm, were compared as environmental adsorbents. They were synthesized by co-precipitation (10 nm-nFe3O4-NH2) and solvothermal (250 nm-nFe3O4-NH2) methods, respectively. The prepared amine-functionalized magnetite was characterized by scanning electron microscope, transmission electron microscope, X-ray diffraction, vibrating sample magnetometer, Fourier transform infrared spectroscopy, size distribution analysis and surface area analysis to compare the properties of different sizes of nFe3O4-NH2. Both nFe3O4-NH2 contained cubic Fe3O4 crystalline structure. The 250 nm-nFe3O4-NH2 exhibited higher magnetic saturation value than the 10 nm-nFe3O4-NH2, but both could be separated from an aqueous solution using an external magnet. The surface area and pore volume of the smaller-sized 10 nm-nFe3O4-NH2 was larger than that of 250 nm-nFe3O4-NH2, but stronger aggregation was observed in the 10 nm-nFe3O4-NH2. Batch adsorption of lead indicated that the 10 nm-nFe3O4-NH2 was a better adsorbent than the 250 nm-nFe3O4-NH2. The maximum adsorption capacity of lead for the 10 nm-nFe3O4-NH2 and the 250 nm-nFe3O4-NH2 were 74.48 mg g–1 and 54.54 mg g–1, respectively. The stronger aggregation of nanoparticles with a smaller particle size did not affect the superior performance of the 10 nm-nFe3O4-NH2 as an environmental adsorbent.
No takes yet. Share an insight, caveat, or question.
Kim et al. (2019) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: