Answers are grounded in this paper and cite their sources.
In the petroleum industry, there is a continuous search for cost-effective enhanced oil recovery (EOR) methods to increase oil extraction. Surfactant-based EOR is one of these effective methods, which is applied after the primary and secondary recovery phases. This paper presents an experimental study on the use of a cationic surfactant, hexadecyltrimethylammonium bromide (CTAB, CH3(CH2)15N(Br)(CH3)3), and smart seawater (SW) for EOR in low-permeability carbonate rock with medium viscosity crude oil. Smart SW was prepared by modifying the concentrations of Ca2+, Mg2+, and SO42- in synthetic offshore SW. The aqueous stability of CTAB was tested in different salinities of smart SW at the reservoir temperature. It was demonstrated that CTAB is stable at 55°C, which was further confirmed through optical transmittance measurements, revealing values mostly exceeding 93%. The use of smart SW and CTAB significantly altered the wettability of carbonate rock towards water-wet and reduced the interfacial tension (IFT) between crude oil and water, reaching levels below 0.087 mN/m. However, the presence of smart SW increased the adsorption of CTAB onto the surface of carbonate rock. Nevertheless, the adsorption values were significantly below 1 mg/g-rock. Smart SW + CTAB resulted in a total oil recovery of 76.71% of original oil-in-place (OOIP), compared to 71.70% of OOIP with unmodified SW + CTAB. These results suggest that the use of smart SW in combination with CTAB is a promising approach for enhancing the recovery of medium-viscosity oil from tight carbonate reservoirs. Findings from this study can help in better understanding the optimal conditions for the application of smart SW-CTAB flooding to improve the effectiveness of tertiary recovery operations in the upstream oil sector.
No takes yet. Share an insight, caveat, or question.
Massarweh et al. (2023) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: