Answers are grounded in this paper and cite their sources.
Various composite electrodes were prepared using Sn4P3 and other active materials (Sb, Bi, Ge, TiO2, In, and Fe) with weight ratios of 70 and 30 wt% for Na-ion battery anode to improve capacity decay of Sn4P3 caused by Sn aggregation. No improvement was observed in the case of composite electrodes of Sn4P3/Ge and Sn4P3/TiO2 due to poor electronic conductivities of Ge and TiO2. Although In and Fe have good electronic conductivities, no improvement was achieved in Sn4P3/In and Sn4P3/Fe because of their low Na+ diffusion abilities. In contrast, the capacity decay was improved by the Sn4P3/Sb and Sn4P3/Bi electrodes. We consider that Sb and Bi have good electronic conductivity as well as Na+ diffusion ability, making it easier for electrons and Na+ to permeate the entire active material layer. In addition, the longest cycle life of 900 cycles was attained when the Sb addition amount was 15 wt%. This improvement was also achieved in Li-ion battery evaluation. Among the composite electrodes with various Sb amount, the longest cycle life was achieved by Sn4P3/Sb(85 : 15 wt%) electrode.
No takes yet. Share an insight, caveat, or question.
Usui et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: