Key result
A wireless wearable ECG monitoring system using an IoT platform, AD8232 sensor, and Wi-Fi module successfully provided high-quality ECG signals with low power consumption and noise.
An IoT-based wearable ECG monitoring system using an AD8232 sensor and ARM processor provides high-quality signals with low power consumption for continuous patient monitoring.
Answers are grounded in this paper and cite their sources.
May support remote ECG monitoring; leaves open prospective validation for diagnostic accuracy.
Background: An electrocardiogram device monitors the cardiac status of a patient by recording the heart’s electrical potential vs time. Such devices play a very important role to save the life of patients who survive a heart attack or suffer from these patients. An early detection of conditions that lead to the onset of cardiac arrest allows doctors to provide proper treatment on time and prevents death or disability from cardiac arrest. Most developing countries have very poor information about these health care issues. Methods: An actual deployment of the system was used to evaluate key aspects of the system architecture, in particular, the possibility to monitor the ECG signal of single patients in a large area and for a long time the possibility to access ECG data through the web interface. The test deployment consisted of ECG sensor AD8232, wi-fi module and IoT server. The IoT server was installed on a Linux/ windows machine. The wifi has been configured to connect to the server, through an ADSL router. Conclusion: We have proposed a wireless wearable ECG monitoring system enabled with an IoT platform that integrates heterogeneous nodes of ECG sensor and applications, has a long battery life and provides a high-quality ECG signal. The system allows monitoring single/multiple patients on a relatively large indoor area (home, building, nursing home, etc). As observed, this result is obtained through a careful set of choices at the level of components, circuit solutions, and algorithms. We would like to stress the fact that a dedicated overall output is not enough to achieve an advantage in terms of overall sensor performance. The latter depends on the optimization of the whole sensor. Indeed, this proposed ECG sensor, based on a high-performance ADC and an arm processor, provides much better performance, in terms of power consumption and noise, than many proposed system based on a purposely designed front-end chip.
No takes yet. Share an insight, caveat, or question.
Kulkarni et al. (2018) studied Cardiac monitoring. IoT based Low Power Wearable ECG Monitoring System was evaluated on System architecture evaluation (ECG signal monitoring, web interface access, power consumption, noise). A wireless wearable ECG monitoring system using an IoT platform, AD8232 sensor, and Wi-Fi module successfully provided high-quality ECG signals with low power consumption and noise.
Synapse has enriched 10 related papers. Consider them for comparative context: