Answers are grounded in this paper and cite their sources.
Summary Shales make up more than 75% of drilled formations and cause at least 90% of wellbore-stability problems. Physical measurements of shale properties are required to develop realistic constitutive relationships and to understand and define shale strength and behavior under downhole conditions. Quantitative shale-strength data are needed to improve wellbore-stability model predictions. This paper describes a research test program to determine the mechanical properties of different classes of shales and to build a database on their characteristics and mechanical behavior. Shale samples from undisturbed block samples were prepared under controlled conditions. Mechanical test techniques were developed to measure effective-stress/strain properties accurately for shales. The tests require a heavy-duty, triaxial test load frame and other specially designed equipment to obtain precise pore pressure measurements. During the tests, pore pressure, stresses, and strains were monitored accurately by an automatic data-acquisition system. The test techniques described can be used to test shales with different characteristics: soft, hard, brittle, plastic, etc. On the basis of results of several shale tests, high-quality, effective-stress/strain data and failure criteria (shale strength relationships) can be obtained routinely.
No takes yet. Share an insight, caveat, or question.
Steiger et al. (1992) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: