Answers are grounded in this paper and cite their sources.
This paper presents an experimental investigation on the post-repair flexural response of mortars with and without damage. In order to improve the mechanical properties of the damaged mortars, which were subjected to different loads ranging between 40 % and 90 %, the mortars specimens were reinforced and repaired using two different composite materials, the first with only epoxy resin, while the second consisted of a mixture of epoxy resin and glass fiber. The results show a significant improvement in the stiffness damaged. Therefore, the reinforced specimens by a layer of resin on the lower side surface increased the bending strength by 58 %, when compared to those control samples. The reinforcement using composite resin-fiber of glass exhibited considerable increases in the safety of constructions. The SEM images of damaged samples with and without repair, revealed the impact of reinforced glass fibers-mortar on the matrix-mortar by improving theirs mechanical performances.
No takes yet. Share an insight, caveat, or question.
Aribi et al. (2020) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: