Answers are grounded in this paper and cite their sources.
Li–O 2 batteries are attracting considerable interest due to their outstanding theoretical capacities and energy densities. The liquid electrolyte and insulating nature of discharge products hinder further development. We present a practical strategy for durable Li–O 2 batteries with high cyclable capacity up to 2 mAh/cm 2 . A dual polymer gel electrolyte (DPGE) networking strategy is proposed for the quasi-solid electrolyte. Lowering the use of liquid components in the electrolyte would suppress the possible side reaction with superoxide intermediates. The DPGE is further combined with a highly effective Mn-based catalyst that is prepared by direct laser writing on polymers to produce the quasi-solid-state Li–O 2 batteries. The DPGE sustains a highly reversible Li plating/stripping process without short-circuiting or an increase in interfacial resistance for over 2000 h. Furthermore, the Li–O 2 battery demonstrated stable galvanostatic charge/discharge performance for over 200 cycles (2000 h) with a cutoff capacity of 0.4 mAh/cm 2 . The battery delivers a high reversible capacity of 2.0 mAh/cm 2 at an elevated current density of 0.4 mA/cm 2, while the charging potential is maintained at a low value. Studies were performed during discharge and charge process to investigate the underlying mechanism. This work could contribute to a better practical design of Li–O 2 batteries.
No takes yet. Share an insight, caveat, or question.
Ren et al. (2020) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: