Answers are grounded in this paper and cite their sources.
Spatial-mode couplers (SMCs) are critical devices for mode-division-multiplexed (MDM) systems. In this letter, we report a low-loss symmetric SMC fabricated with custom-designed two-mode fiber and commercially available standard fused biconical taper station. Sophisticated hydrofluoric etching or pre-pulling on the fiber sample is not needed for fabrication. We characterize the performance of the fabricated SMC, which shows a low loss of 1.1-2 dB and high modal extinction ratio of ≥ 20 dB for a broad wavelength range from 1539 to 1555 nm. We demonstrate transmission of 69.2-Gb/s LP01/LP11dual-mode MDM coherent optical orthogonal-frequency division multiplexing signal over 4.5-km two-mode fiber using the fabricated SMC as mode multiplexer. The signal is successfully received at low (0.1/0.5 dB) optical signal-to-noise ratio penalty, and the estimated channel matrix confirms that there is very low modal crosstalk in both the SMC and the fiber.
No takes yet. Share an insight, caveat, or question.
Li et al. (2013) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: