Answers are grounded in this paper and cite their sources.
The density limits were determined in Ohmic and L mode discharges over a wide range of parameters: B T = 0.8-2.1 T, I p = 0.5-1.9 MA, an elongation of 1.09 to 1.92, Z eff < 2, P beam ≲ 8 MW and n e,max 1.2 × 10 20 m -3 . The density limits in ELMing H mode discharges were also determined and found to be comparable with those of the Ohmic and L mode discharges. In Ohmic plasmas, the density limit increased linearly with I p and decreased with minor radius (~1/a 2.4 ); the density limit showed little, if any, dependence on either B T or plasma elongation. These results are in good qualitative agreement with Greenwald density limit scaling, (n e,max (10 20 m -3 ) ~ I p (MA)/a 2 (m)). In discussing the density limits of detached plasmas, the 'effective' minor radius must be considered. The density limit data for L and H mode discharges were also consistent with Greenwald scaling. The density limits in the L and H modes were insensitive to the heating power. In the Ohmic and L mode cases, rotating MHD modes, typically with m/n=2/1, existed in high density discharges with no perceptible adverse impact on particle confinement until they locked, precipitating global disruptive behaviour. To date, the data show that the ELMing H mode density limit is not disruptive in itself
No takes yet. Share an insight, caveat, or question.
Pétrie et al. (1993) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: