Answers are grounded in this paper and cite their sources.
Increasing the operating voltage can significantly increase the energy density of LiCoO 2 , but it is accompanied by severe structural damage and interface degradation. Especially at a high voltage above 4.5 V, LiCoO 2 faces severe challenges, such as irreversible phase transition, lattice oxygen loss, and electrode–electrolyte interface evolution. Herein, a high-voltage LiCoO 2 cathode material with bulk doping and surface coating synergistic modification was designed and prepared. The doped Mg 2+ ions entered the lithium layers as pillars, stabilizing the layered framework. Meanwhile, Li 1.3 La 0.3 Ti 1.7 (PO 4 ) 3 was uniformly coated on the surface of LiCoO 2 , which is beneficial for suppressing Co 3+/2+ ion leaching and interface side reactions during cycling. Furthermore, Li 1.3 La 0.3 Ti 1.7 (PO 4 ) 3 is a fast ion conductor, which facilitates the rapid transport of lithium ions on the surface of the cathode material. Owing to the synergistic effect of Mg 2+ ion doping and Li 1.3 La 0.3 Ti 1.7 (PO 4 ) 3 coating, the orbitals of Co 3d and O 2p in LiCoO 2 crystal are changed, and the irreversible phase transition and oxygen loss are inhibited. The modified material exhibited an excellent electrochemical performance. A discharge capacity of 175.5 mAh·g −1 at 10 C rate, as well as a capacity retention of 90.14% after 200 cycles at 1 C rate, was achieved in the modified material. This work supplies a new method for developing high-voltage oxide cathodes through bulk and interfacial modification.
No takes yet. Share an insight, caveat, or question.
Mao et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: