This is the authors' abstract. We don't add key points for this paper.
Efficient energy conversion technologies, including electrochemical systems such as solid oxide cells (SOCs) and solid-state thermoelectric (TE) materials, are essential for improving overall energy utilization efficiency and reducing carbon emissions [1, 2]. SOCs utilize renewable electricity to produce hydrogen through water electrolysis, carbon monoxide through direct CO2 electrolysis, or synthesis gas through co-electrolysis [3]. These products can serve as sustainable raw materials for the chemical industry and facilitate large-scale integration of renewable power. Heterogeneous metal–support catalysts are commonly employed at the electrodes to accelerate reaction kinetics and modify reaction pathways. Similarly, advanced functional materials and interfaces play a critical role in optimizing TE device performance by governing charge and heat transport [4]. Although considerable effort has focused on tailoring the size, morphology, and composition of the main components in SOCs and TE materials, achieving high device performance remains a challenge. In this regard, directly observing the dynamic evolution of key physical and chemical parameters of heterogeneous catalysts and functional materials under realistic operating conditions, including heating and electrical biasing in a controlled chemical environment, is essential for understanding energy conversion mechanisms and guiding next-generation materials design. A range of in-situ spectroscopic and imaging techniques are essential for probing dynamic processes in SOC and TE devices. Recent advances in MEMS-based sample carriers and corresponding transmission electron microscopy (TEM) holders have enabled in-situ TEM studies of nanoscale material dynamics under heating and variable gas environment [5-8], offering unprecedented insights into the energy conversion processes at the single particle level. In this work, we present our systematic study of representative materials for SOC (and TE devices under controlled atmosphere (gas pressure, composition, and relative humidity) and external stimuli including heating and biasing. We employed a novel gas-cell TEM holder with multiple electrical contacts that enables simultaneous thermal and electrical characterization of the sample in a gaseous environment (Fig. 1 a, b). FIB lamellas of Sr2FeMo0.65Ni0.35O6-δ (SFM-Ni), Fig. 1 c and Mg-based TE compound, Fig. 1 d were prepared on gas-heating-biasing chips; the samples were placed over the electron-transparent and leak-tight windows and bridged two biasing electrodes to apply and measure electrical stimuli. This approach enabled the real-time observation of microstructure evolution of SOC and TE samples under realistic device operating conditions, revealing the underlying mechanisms of energy conversion. The findings deepen the understanding of high-temperature (co)electrolysis and thermo-electric conversion processes and guide the design of high-performance materials for energy applications. (a) In situ gas-heating-biasing TEM sample holder (Climate Infinity); (b) the disassembled gas Nano-Reactor (1- seal chip, 2- electron transparent window of the seal chip, 3/4- gas inlet and outlet, 5- functional chip, 6- electron transparent window of the functional chip surrounded by heating and biasing electrodes, 7- eight contact pads for applying heating and biasing stimuli; FIB lamella samples of (c) SFM-Ni and (d) Mg-based TE compound prepared on the gas-heating-biasing chips.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Chakraborty et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: