This is the authors' abstract. We don't add key points for this paper.
A compact, circularly-polarized (CP), end-fire, 4×1 continuous beamsteering antenna array implemented using substrate-integrated waveguides for 5G mobile terminals is proposed in this paper. The purpose of this system is to complement the radiation patterns of planar phased arrays on the faces of a typical mobile terminal. The proposed system seamlessly integrates previously-presented antennas and polarizers, with adjustable phase shifters and a feeding network in a multi-layered, single stack, printed circuit board (PCB) for continuous beamsteering in a compact package. Through the use of forward and reverse couplers, and the stacking of the phase shifters on top of the feeding network, a compact form factor of 7.6×4.1×0.38λo3 is achieved. The system was fabricated and assembled through standard PCB processes. The measurements illustrated that the system can achieve a continuous beamsteering range of ±35∘ with an axial ratio better than 3 dB and a gain variation less than 3 dB. A measured impedance bandwidth (BW) of 8.9% at 28 GHz is also demonstrated. Given its performance, size, ease of manufacture, integrated control lines and single RF feed, the proposed system is a good candidate for 5G millimeter-wave continuous beamsteering in mobile terminals.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Al‐Amoodi et al. (2023) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: