This is the authors' abstract. We don't add key points for this paper.
X-ray reflectivity and spectroscopy, voltammetry, and scanning probe microscopy were used to investigate the dealloying of Cu x Au (with x ≈ 4) below the critical potential. We studied ultrathin films deposited on oxidized silicon wafers with a thickness of 2.2, 8.5, and 43 nm, which had been determined precisely by X-ray reflectivity. With the help of quantitative X-ray fluorescence (XRF) analysis, the average composition of the films before and after the leaching was determined. In this way, the amount of material going into solution could precisely be analyzed. A compositional depth profile was obtained by angle-dependent hard X-ray photoelectron spectroscopy before and after the dealloying. Two novel findings are reported. (1) Close to the Cu/Cu 2+ redox potential, a pronounced increase in current is observed in the voltammogram. While this charge transfer seems to indicate the dissolution of Cu 2+, XRF analysis proves that no copper has been lost to the solution. (2) The XRF analysis shows that some gold is going into solution well below the critical potential and far below the Au/Au 3+ redox potential. We assign this to stripping of gold atoms from highly unfavorable surface bonding sites.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Rajput et al. (2016) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: