Answers are grounded in this paper and cite their sources.
It has been experimentally proven that by using external confining steel jackets at high-stress locations of columns, cyclic behavior of steel or concrete columns can be improved.This study experimentally investigates the cyclic behavior of jacket-confined composite steel/concrete columns configured by square concrete-filled steel tubes (CFST) and ultra-high-strength (UHS) concrete (compressive strength nearly 125 MPa [18.1 ksi]).The CFST columns are locally confined by steel jackets at their base (that is, region of plastic hinge).Five novel steel-jacket-confined CFST (JC-CFST) columns are tested under combined constant axial and cyclic lateral loading and their responses are compared with those of three CFST counterparts.Test parameters include: (a) thickness of steel jacket; (b) profile of jacket section (square or rounded corners); (c) strength of steel tube (conventional and high-strength steel); and (d) axial load ratio, n.Test results demonstrated that the confining stresses provided by the steel jacket started increasing after the concrete crashing.In JC-CFST specimens, the ultimate drift ratio, θu, improved almost proportionately to the jacket confinement index, λm, and significantly decreased as n increased.The use of high-strength steel for the steel tubes was also effective to increase θu by 20 to 25%.The cumulative energy dissipation of the JC-CFST columns was found to be much greater than that of the CFST counterparts due to the better deformation capacity of the former.The lateral displacement of the column caused by the base rotation was significant.
No takes yet. Share an insight, caveat, or question.
Hu et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: