Answers are grounded in this paper and cite their sources.
Introduction. An important characteristic of respirator is the capability of its half-mask to protect the respiratory organs the surrounding contaminated atmosphere due to a tight half-mask-face contact. statement. Keeping a constant pressure difference under the mask is a low-cost and simple method of diagnostics of half-mask protective properties involving special-purpose test aerosols. The method is based the determination of the air amount entrained through the gaps while generating rarefaction within the under-mask . However, there have been no recommendations on the use of the method for evaluating the insulating properties of filtering half-masks from under which it is impossible to evacuate air. is to represent a simplified method with measuring the rarefaction under a filtering half-mask making possible determine its insulating properties and protection coefficient. and Methods. Protection coefficient of respirator can be evaluated in terms of air amount passing through filtering material and gaps with the preset coefficient of penetration and suction. The latter is calculated as coefficient of into the gap of the preset length. Air consumption is determined experimentally as pressure difference between half-mask mounted tightly on a dummy and the tubes of preset diameter positioned along the obturation line. . A calibration line of the relation between the pressure difference and the air consumption through a gap for filtering half-masks has been developed. Coefficients of insulation and protection of Lepestok-type respirators have calculated. The protection coefficients have been established to proportionally depend on the ratio of air consumption a filter and gaps between the face and the half-mask along the obturation line. . It has been proved that the methods for determining the protective properties of filtering half-masks in of measuring pressure difference may be used as a low-cost alternative to expensive diagnostics of the quality of protective devices. Also, they can be employed for selecting and training workers to properly use the respirators manufacturing conditions in accordance with EN 529:2006 requirements.
No takes yet. Share an insight, caveat, or question.
Golinko et al. (2018) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: