This is the authors' abstract. We don't add key points for this paper.
A novel electrochemical quantification method is proposed for determining low contents of lithium oxide (Li 2 O) impurities in lithium sulfide (Li 2 S), based on the operating principles of lithium–sulfur battery systems. Li 2 O is a critical impurity in Li 2 S used for next-generation battery applications, including sulfide solid-state electrolytes and high-energy cathodes. It promotes electrolyte decomposition and induces parasitic side reactions during solid electrolyte synthesis. In addition, due to its intrinsically low ionic and electronic conductivity, Li 2 O increases the overall electrode resistance. Accurate quantification of Li 2 O is therefore essential for achieving high-purity Li 2 S and a predictable performance. However, conventional techniques such as X-ray diffraction (XRD) and titration suffer from poor accuracy and reproducibility, especially at low concentrations or in amorphous forms. To address these challenges, we designed Li 2 S electrodes with controlled amounts of Li 2 O and employed linear sweep voltammetry (LSV) to detect and quantify the oxidation peak associated with Li 2 O around ∼3.7 V (vs Li/Li + ). A strong linear correlation ( R 2 > 0.992) was observed between the LSV peak area and Li 2 O content below 5 wt %. Cross-validation with industrial Li 2 S samples using XRD, SEM-EDS, and oxygen analysis further confirmed the reliability of this approach. This methodology enables direct quantification of a low Li 2 O content through a simple electrode fabrication and LSV measurement process. Its high accuracy, low cost, repeatability, and fast analysis speed make it a promising tool for the quality assessment of Li 2 S materials and process control in commercial production lines.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Jeong et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: