Answers are grounded in this paper and cite their sources.
This work deals with the preparation and characterization of pure and Nickel-doped porous Tin oxide (SnO 2 ) thin films, using Spray pyrolysis technique for an eventual application in optoelectronics. The structural, morphological, optical, and electrical properties of these prepared samples were investigated using various techniques. X-ray diffraction analysis confirmed the tetragonal structure of pure SnO 2 and Ni-doped films. The preferred orientation of the crystallites changed from (110) to (200) with the film doped at 15.3 at.% Ni, with crystallite size of about 10 and 18 nm for 15.3 at.% Ni-doped and 5.6 at.% Ni-doped SnO 2 , respectively. Scanning Electron Microscopy shows that the 15.3 at.% Ni-doped SnO 2 film surface is relatively homogeneous, while the 5.6 at.% Ni-doped film is highly porous. The measured contact angles are less than 90° for all the prepared samples confirming the hydrophilic character of all the films. Transmittance as high as 85% in the visible region was observed for 5.6 at.% Ni-doped films, while lower transmittance is observed for 15.3 at.% Ni-doped films. A decrease of the optical band gap and the resistivity with increasing Ni dopant concentration were also observed.
No takes yet. Share an insight, caveat, or question.
Khalfallah et al. (2020) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: