Answers are grounded in this paper and cite their sources.
Connected cars with a multitude of frequency bands to be covered for the 4G and 5G mobile communication standards would benefit immensely from the low-profile and compact multi-band antenna designs. This paper considers the simulation, design, and measurement aspects for an innovative penta-band patch antenna that operates in the LTE-1800 uplink (1.71-1.78 GHz), LTE-1800 downlink (1.805-1.875 GHz), UMTS uplink (1.92-1.998 GHz), UMTS downlink (2.11-2.17 GHz), and LTE-2600 (2.5-2.69 GHz) frequency bands encompassing a total bandwidth of approximately 468 MHz, 261 MHz of which was covered with |S11|11|2<; -6 dB in the measurement. We achieved the multi-band behavior by simultaneous exploitation of the principles of horizontal stacking and corner feeding of the microstrip patch antennas. The maximum value of the measured realized gain, i.e., 5 dBi, was obtained for the LTE-2600 band, while its minimum value, i.e., -1.7 dBi, was obtained for the LTE-1800 downlink band. The measured realized gain was between 2 and 3 dBi at all other frequencies. A thickness of just 1.7 mm makes the antenna very low-profile, which, in addition to its compact dimensions (175 mm × 47 mm), makes it suitable for embedding/mounting in many promising locations around a car, such as in rooftop cavities, or in exterior plastic paneling.
No takes yet. Share an insight, caveat, or question.
Singh et al. (2019) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: